The character of its older buildings is one of the reasons many owners buy here: the sandstone, the slate, the sash and case windows. It is also the reason those properties need considered care. Frost, wind, driving rain and, on the coast, salt air create a set of maintenance requirements that are worth understanding before something goes wrong.
Exposed metalwork
Wet weather, and salt air in coastal locations, corrode metal at an accelerated rate. Window hinges, door furniture, external fixings, guttering brackets and cast iron will deteriorate faster in exposed positions than the manufacturer's specification suggests. An annual check of all external metalwork, with lubrication and replacement of corroded fixings, prevents minor deterioration from becoming structural.
Aluminium and uPVC fare better than steel and iron, but no material is entirely immune. Properties with wrought iron railings, cast iron drains or traditional sash window ironmongery need more attention and more frequent checking.
Roofing and pointing
Scottish slate is a durable roofing material, but the pointing and flashing around chimneys, valleys and junctions deteriorates under sustained wind and rain. A loose slate in a storm does not mean a failing roof. It means one slate needs replacing. Left unattended through another winter, however, the water ingress behind it can compromise the roof timbers and require significantly more work.
Pointing on stone elevations should be checked every two to three years in exposed positions, and traditional walls should be repaired in lime rather than cement so that they can continue to dry out. Failed pointing allows water into the wall fabric, where it freezes, expands and accelerates decay. Repointing when the mortar starts to fail costs a fraction of what remediation costs once water has penetrated.
Drainage and guttering
A property with blocked guttering during a winter storm will channel water directly to the foundations, into wall cavities and potentially into the structure. Gutters should be cleared in November before the worst of the winter weather arrives, and checked again after any sustained period of high winds.
Ground-level drainage around the property is equally important. Heavy soils and sloping sites mean surface water has to go somewhere. Clear drains and adequate fall away from the building are the difference between a dry property and one with persistent damp at ground level.
Timber and paintwork
External timber needs repainting or re-treating on a cycle shorter than most owners assume in exposed locations. A sheltered property might get seven years from a quality exterior finish. The same finish in an exposed position may need attention after three. Peeling and cracking paintwork is not just cosmetic. Once the protective layer is compromised, the timber beneath takes on moisture and begins to degrade.
Check fascias, soffits, window surrounds and any external cladding each year. A brush, preparation and a pot of paint on a small area costs very little. Replacing a rotten fascia board or window frame costs considerably more.
Heating and ventilation
A property that sits unoccupied for extended periods without adequate ventilation will develop condensation and eventually mould. This is not a problem unique to older properties. Modern, well-insulated houses that are sealed for weeks at a time trap moisture just as effectively.
Maintaining a background heating temperature of around 12 to 15 degrees Celsius during winter prevents the worst of it. Trickle vents, extractor fans and deliberate ventilation during visits help manage moisture levels. Properties with persistent condensation issues benefit from a dehumidifier running on a timer during prolonged absence.
A simple annual maintenance schedule
For a traditional property in the region, an annual maintenance cycle looks something like this: gutters and drains cleared in October before winter; external metalwork, pointing and paintwork checked in March after winter; roof inspection and any remedial slating in spring; timber treatment and repainting on a rolling three-to-four-year cycle. This is not an expensive programme. It is a consistent one, and consistency is what prevents modest maintenance from becoming costly repair.